Insert the 1 inch lashing safety strap into the one inch slits on the lift plate, note lashing straps do not have hooks.
Make sure to have proper spacing around the hand truck prior to lifting a water heater. For proper placement of the hand truck, tilt water heater forward with gas control valve facing away from the lift strap.
Position hand truck fully under the water heater.
Cinch the safety strap tight around the water heater.
Repeat in reverse for removal of your old water heater.
Roll the hand truck and water heater to the desired location.
Tilt the hand truck forward, making sure the water heater base and or pan is in contact with desired location on the water heater stand.
Release your safety strap.
Slide the water heater into position on the stand or platform and remove the hand truck.
Hero Hand Truck Instructional Video
Hand Truck Heavy Load Assist Kit (HLAK) Instructional Video
How To Use Hand Truck Heavy Load Assist Kit (HLAK)
Always make sure to lock your load or water heater in place with the provided safety strap.
With the hand truck in the vertical position release the assist kit by pressing on the foot release pedal.
Place your foot on the tire and push forward which will allow the assist kit to go into the fully extended position.
You can then crank up the water heater and let it rest on the water heater stand as seen in our video or you can crank the hand truck up further and raise it to a vertical position and gently set the water heater down on top of the stand.
Repeat in reverse for lowering the water heater.
HHT Quick Demonstration Videos
The Winch
Lashing Strap
HD Wheels
Detachable Lift Plate
Release Pin
Lift Assist in Action
Tips for using the Hero Hand Truck
When lifting a new water heater position the gas control valve facing forward or to the side so it does not come in direct contact with the lift strap.
For extra safety when lifting a heavy tank such as a 75 gallon, use a tie down strap connected to the two contact points at the top of the tank.
For easy transport in your work vehicle we have two suggestions:
To make the hand truck lighter during the loading process, pull the lift plate pin to remove the lift plate and set it aside in your vehicle. If you are transporting the hand truck by laying it down, be sure to insert the lift plate pin into the side rail hole.This will lock lift plate and keep it secure while driving.
Always remember to use the 1 inch lashing strap for extra safety. Insert the strap through the slits at the top of the lift plate and make sure that it’s tight before operating the hand truck.
Hero Hand Truck Maintenance
Newest M3 Model
Periodically remove and inspect the lift plate rollers.
Do not lubricate the wheels or channels, lubrication will attract dirt and debris which will impede the lift plate.
Periodically inspect the winch base plate bolts to make sure they are tight.
Grease zerk fittings on wheels once every 6 to 12 months.
Keep the lift strap clean and free of debris.
For Older M2 Models
Be sure to grease the lift rods for a smooth lift.
Grease the zerk fittings on the wheels every 6 to 12 months.
Periodically inspect the lift rod bolts for proper tightness.
Periodically inspect winch base plate bolts for proper tightness.
Keep the lift strap clean and free of debris.
*Disclaimer*
When operating the Hero Hand Truck, before lifting be sure the safety strap is tight. When the lift plate is in the raised position do not to put hands or feet below the lift plate. Failure to do so can result in serious injury.
Tips for using the Hero Hand Truck